Cleaning and Care for Mi Smart Scale 2

Why Proper Care Matters

Keeping your Mi Smart Scale 2 clean and well-maintained helps:

• Preserve measurement accuracy (stable footing and clean surface reduce slipping and shifting)

• Extend the lifespan of the glass top and internal sensors

• Prevent battery corrosion and compartment damage

• Keep the scale safe to use, especially on smooth floors

1) Before You Clean: Quick Safety Checklist

• Step off the scale and make sure it’s not actively measuring.

• Keep it dry: do not clean right after a shower when the room is humid and your hands are wet.

• Never rinse under running water and never soak the scale.

• If you notice battery leakage, stop using the scale until you safely remove and clean the battery compartment (see Battery Care section).

2) Routine Cleaning (Daily / Weekly)

What You Need

• A soft, lint-free cloth (microfiber is ideal)

• Clean water (slightly damp cloth, not dripping)

• Mild detergent (optional, only if the surface is greasy)

Steps

1. Wipe the glass surface using a slightly damp cloth.

2. If needed, add a tiny amount of mild detergent to the cloth (not directly to the scale).

3. Wipe again with a cloth dampened with clean water to remove any soap residue.

4. Dry thoroughly with a clean, dry cloth—especially around edges.

What to Avoid

• Organic solvents or chemical cleaners (for example: thinner, benzene, acetone, strong alcohol-based solvents)

• Abrasive powders and scouring pads (they can scratch the glass and dull the finish)

• Spraying liquid directly onto the scale (liquid can seep into seams and the battery cover)

3) Deep Cleaning (When It’s Really Dirty)

Use this when there are visible stains, sticky spots, or dusty buildup around edges.

1. Prepare a cloth with water + a very small amount of mild detergent.

2. Wipe gently without pressing hard (glass is strong, but impacts and concentrated pressure can still be risky).

3. Use a dry cotton swab or corner of a cloth to clean around the battery cover seam—do not push debris inside.

4. Dry completely and leave the scale unused for a few minutes to ensure all moisture evaporates.

4) Keeping Measurements Consistent Through Care

Cleanliness affects stability. To keep results reliable:

Placement Tips

• Put the scale on a hard, flat surface (tile or hardwood is best).

• Avoid soft surfaces like thick carpet or foam mats—they can cause inconsistent readings.

• Don’t place it on a slippery floor where it may shift.

Usage Habits That Protect the Scale

• Use the scale with dry feet and make sure the surface is dry before stepping on it.

• Step on and stand still, centered on the scale (movement can affect readings and stresses the unit).

• Avoid dragging the scale across the floor—lift and place it to prevent scratches and impacts.

5) Battery Care (Prevents Corrosion and Damage)

Battery issues are one of the most common reasons a scale fails.

Best Practices

• Replace batteries promptly when low to avoid sudden shutdowns or unstable operation.

• If batteries are depleted, remove them immediately to reduce risk of leakage and corrosion.

• If you won’t use the scale for a long time, remove the batteries for safe storage.

If You See Battery Leakage

1. Do not touch your eyes or face after handling batteries.

2. Remove batteries carefully.

3. Wipe the compartment gently with a dry cloth.

4. If corrosion is visible, clean lightly with a barely damp cloth, then dry completely.

5. Insert fresh batteries only when the compartment is fully dry and clean.

6) Storage and Handling Tips

• Store and use the scale in a dry environment.

• Keep away from direct heat sources and very humid areas (for example: right next to a shower).

• Avoid dropping objects on the scale—impacts can damage the glass and internal components.

• Keep it out of reach of small children when not supervised (glass device + batteries).

7) Quick “Do & Don’t” Summary

Do

• Wipe with a damp cloth and mild detergent if necessary

• Keep the scale and your feet dry

• Use it on a flat, hard surface

• Remove depleted batteries quickly

Don’t

• Immerse in water or rinse under a tap

• Use solvents or harsh chemicals

• Spray cleaner directly onto the scale

• Use on slippery floors or when wet